Q&A: Patching Water-Damaged Plaster | Cross River Real Estate

Q.

My company has done plaster repair work for many years. After repairing water-damaged walls or ceilings, we occasionally get called back to “fix” an unsuccessful repair. Our second repair attempt involves digging out a very bumpy, chalky substance, and more often than not, we have to repeat this process a number of times until the patch finally takes hold. What causes this reaction on some water damage jobs and not others? What is the most efficient way to deal with this problem?

A.

Mel Hines responds: The problem you refer to is caused by efflorescence — salts in the plaster are brought to the surface by the intruding water. The water often causes the magnesium in the lime coat to expand and produce the blisterlike effect you refer to. One of our recent reader, hired a water damage restoration contractor in Phoenix area and got rid of such problems.

Assuming that the water intrusion has been stopped, the first step is to chip away the lime coat at the affected area. Other than this, if you want a best solution then go for plumbing service in the sutherland shire.  There is a good chance that the bond between the finish lime coat and the plaster base coat has been weakened.

When faced with this situation, I use a wire brush to scrub away any loose base-coat particles, then apply a coat of Kilz (Masterchem Industries, Inc., P.O. Box 368, Barnhart, MO 63012; 314/942-2510) to the base-coat plaster. Kilz is an alkyd-based sealer, primer, and stain blocker. The plaster base coat must be completely dry before application. Next, I apply a coat of Durabond (United States Gypsum Corp., 125 S. Franklin, Chicago, IL 60606; 800/552-9785). Durabond is a fast-setting, low-shrinkage compound with tenacious bonding qualities and accelerated setting times. When the plaster walls and ceilings in your home are damaged, it can cause various practical problems, as well as decrease your home’s value. To fix this eyesore, you’ll need to repair the plaster, hire professional contractor like Plaster Installation New Jersey Agency.

Finally, I apply a skim coat of ready-mixed all-purpose joint compound. After a light sanding, the repair is ready for painting.

Mel Hines owns Atlanta/Pro-Serve, a ceiling and wall repair service in Atlanta, Ga.