Furnace check-up or tune-up is much like a visit to the doctor | Pound Ridge Real Estate

Nobody wants to think about a  heating system when it’s still warm and sunny outside, but winter is never that  far away, and servicing a heating system now will ensure that the heat  will click on when you want it to.

Furnace Check-up A furnace check-up or furnace repair is much like a visit  to the doctor or taking your car to a mechanic. However, specifically in the  case of your home, a furnace check-up consists of the following steps:

• Inspect thermostat for proper operation.
• Inspect filter and change or clean as needed.
• Check all electrical components and controls.
• Oil motors as needed.
• Inspect heat exchanger for possible cracks. A crack in the heat exchanger  will introduce carbon monoxide into the living space.
• Check air flow. If diminished, it may be necessary to clean the evaporator  coil.
• Check air fuel mixture, where appropriate.Furnace Maintenance While having your furnace tuned and checked  each year before the cold weather is wise practice, there are also a few things  you can do to assure that your furnace is operating properly, safely, and to its  fullest capacity.
• The very first thing to check before turning on your unit is to make sure  nothing flammable has been stored next to the furnace over the summer. Many people have set their weed eaters, lawnmowers, and gas cans against their furnace in the garage. This is just asking for a fire or an explosion.
• Run your heater for a few minutes before you actually need it. Waiting  until the first cold morning to discover it isn’t working will land you at the bottom of a waiting list before a heating and air specialist can come to fix it. If that does happen, call a furnace repair service.
• Change the filters regularly. Dirty filters restrict air flow, reducing  efficiency and worst case, can cause the heat exchanger to overheat. Disposable  fiberglass filters should be replaced.
• Electrostatic or electronic filters need to be washed regularly.
• Be sure all access panels are secure, with all the screws in place.
• Be sure the thermostat is set in the heating mode. Just setting the dial  above room temperature will not activate the heat if still set in the air  conditioning mode to discard any furnace maintenance is need.Things You Should Know About Your Furnace Many homeowners find that  when they turn their furnace on for the first time that it emits a noxious  smell. This is not Carbon Monoxide. Carbon Monoxide is odorless, so you wouldn’t  be able to smell it even if it was. What is happening here is that dust has  settled on the heat exchanger over the summer and turning on the unit for the  first time is just burning off the dust. Be sure to open some windows to dispel  the odor quickly.

• Read more:  http://www.homeadvisor.com/article.show.Furnace-Tune-Up.8580.html/&m=homesense&entry_point_id=27026198#ixzz2llVPuTiL