DIY Garden Lights | Mount Kisco Homes

Reuse plastic bottles to make these easy, elegant DIY garden lights that cost  almost nothing.

After you’ve gathered the materials and tools, it takes only about 10 minutes  to put together this garden light for your property.

Step 1: What You Need

Materials and tools you’ll need to make one DIY garden light:

• One plastic bottle (A translucent bottle works well; you can reuse plastic  bottles that originally held laundry detergent or fabric softener.)
• One old bicycle inner tube, or at least 6 rings cut from an inner  tube
• One broomstick, as long as you prefer
• Pair of scissors
• Small hacksaw
• Tea light (small candle in an aluminum container)

Step 2: Sawing

Use the hacksaw to cut off the bottom of the plastic bottle as well as a thin  slice off the top of the cap.

Step 3: Quarters

Make four long cuts with the scissors along the corners of the plastic  bottle.

Step 4: Petals

Shape the four parts from Step 3 into leaves by trimming off the rounded  corners.

Step 5: Cap Adjustment

Unscrew the cap from the plastic bottle. If there’s an inner ring on the  bottom of the cap, remove it with the hacksaw. The goal is to make the cap flat —  and open — on the underside.

Step 6: Big Match

Cut six rings from the bicycle inner tube. Pull the rubber rings over the end  of the broomstick, one at a time, so that they cover each other and form a  layered gasket. Make sure the broomstick’s end has been built up with enough  rubber layers so that the bottle cap can be pushed on only with some effort. You  may need to cut more rubber rings if the seal is too loose.

 

 

 

Read more: http://www.motherearthnews.com/diy/plastic-bottle-garden-lights-zboz1309ztri.aspx#ixzz2kiv0ie9F