The Chernobyl Nuclear Meltdown: What Happened? | Bedford NY Real Estate

The international nuclear power industry was quick to distance itself from the Chernobyl nuclear meltdown. Officials in nearly every nuclear nation assured the public that 1) the Soviet plant’s design was unique, 2) it didn’t have a protective containment around its reactor and 3) it lacked sophisticated safety systems. We were to believe that deficient design was responsible for the largest release of long-lasting radioactive material ever. The palliative was, “It can’t happen here.”

RELATED CONTENT

Life After Chernobyl: The Aftermath of a Nuclear Accident

A Swedish family copes with the aftermath of the Chernobyl nuclear accident and shares their experi…

No Escape From Radiation and Chemical Pollution

Learn about one reader’s experiences with chemical pollution and radioactive leaks, which affected …

Corporate Crime, Wind Turbine Noise, French Nuclear Accident, and More

This installment of the Energy Flashes feature touched briefly on over a dozen topics, including a …

Ecoscience: Lessons of the Three Mile Island Nuclear Accident

This article looks at the sequence of mechanical and operator failures that led to the 1979 Three M…

The Chernobyl Nuclear Meltdown: What Happened?

Until the Soviets released a detailed report at an international meeting in Vienna in late August 1986, most pronouncements about Chernobyl were idle speculation. Very little was known about what actually happened on April 26, 1986. Now we know that two of the power industry’s initial contentions were false.

1. Chernobyl No. 4 did differ significantly from most nuclear plants in the West. It combined common elements in an uncommon way. The nuclear reactor was graphite-moderated and cooled by pressurized water, which means that the uranium fuel rods were arrayed in a matrix of graphite that slowed (but didn’t absorb) neutrons to facilitate self-sustaining fission, and that heat was removed by pressurized water flowing around the core.

There are, in fact, many graphite-moderated reactors in use in the West, but most are gas-cooled. Pressurized water reactors (PWRs), which use water for both moderation and cooling, are more common, but most of the plants in England are graphite-moderated and gas-cooled. Graphite-moderated reactors are also used in France, Italy, Japan and the United States (at Hanford, Washington, and Savannah, Georgia), and a few of these are cooled by pressurized water. The reason for the popularity of graphite-moderated reactors is simple: Their internal geometry is particularly good for producing plutonium for bombs. (Surprisingly, Chernobyl doesn’t seem to have been used for this purpose.)

Graphite core reactors aren’t inherently more hazardous than PWRs—each type has advantages and disadvantages—but the combination of graphite moderation with pressurized-water cooling may have been a crucial factor at Chernobyl.