Mirrors in architecture have somehow gained the reputation of being cheap trickery. Part of this bad rap stems from the dreadful gold-veined mirror tiles that were so popular during the 1970s. They were applied haphazardly by laypeople and decorators alike, and became associated with all the other excesses of this period.
Such kitsch aside, mirrors are one of the simplest and most effective ways to enhance interior architecture. But to be successful, they must be integrated into the architecture, not applied as an afterthought.
1. First, make sure you buy good-quality float or plate glass mirrors. Cheaper mirrors have ripples that distort the reflection, as well as thin silvering, which will quickly corrode. Also, for a really clean installation, attach mirrors with mastic rather than clips (you may wish to have a glazier do this for you). Mirror size is limited mainly by cost and by the clearances available in your house; floor-to-ceiling mirrors up to 4 feet wide are not uncommon.
This post was last modified on %s = human-readable time difference 7:57 am
Just back out of hospital in early March for home recovery. Therapist coming today.
Sales fell 5.9% from September and 28.4% from one year ago.
Housing starts decreased 4.2% to a seasonally adjusted annual rate of 1.43 million units in…
OneKey MLS reported a regional closed median sale price of $585,000, representing a 2.50% decrease…
The prices of building materials decreased 0.2% in October
Mortgage rates went from 7.37% yesterday to 6.67% as of this writing.
This website uses cookies.