6 Steps for Your Energy Audit in Mount Kisco NY | Mt Kisco NY Real Estate

Is your home squandering precious energy? Here’s how you can search out areas of energy waste that may be costing you money. By following up on problems, you can lower energy bills by 5% to 30% annually. With annual energy bills averaging $2,200, investing in fixes or energy-efficient replacement products could save you up to $660 within a year.

Leave the deerstalker hat and magnifying glass behind. All you’ll need for energy sleuthing is a flashlight, screwdriver, paint stirrer, tape measure, and—not just for serenity’s sake—a stick of incense.

1. Hunt down drafts. Hold a lit stick of incense near windows, doors, electrical outlets, range hoods, plumbing and ceiling fixtures, attic hatches, and ceiling fans in bathrooms—anywhere drafts might sneak in. Watch for smoke movement. Note what sources need caulk, sealant, weather-stripping, or insulation.

2. Check attic insulation. Winter or summer, insulation does the most good when it’s overhead, so start with the attic. First, do you have insulation? If the insulation you see covers the tops of the joists by several inches, you probably have enough. If the insulation is only even with the tops of the joists, you probably need to add insulation.

3. Check wall insulation. Remove electrical outlet covers to see if your wall contains insulation. Installing spray foam insulation is easy to do and can dramatically improve a building or home’s energy efficiency and thermal resistance. Shut off power to the receptacle before probing beside the electrical box with a wooden paint stirrer. Check some switch boxes as well. Their higher wall location lets you see if blown-in insulation has settled.

4. Look for stains on insulation. These often indicate air leaks from a hole behind the insulation, such as a duct hole or crack in an exterior wall. Seal gaps with caulk or spray foam insulation brooklyn. Radon is widely known in the home improvement industry. It’s kind of one of those things that no one likes to discuss, because the danger is so surreal. You’ve probably heard of toxins being referred to as silent killers, and when it comes to radon; that’s no understatement. Maybe you haven’t heard that much about radon or what you have heard has not been too convincing. Does radon seem to be some “new” thing that is going to cause cancer and end the world? Everything seems to cause cancer, but the trick is in knowing how to prevent cancer, before it begins. Not everything causes cancer. That way of thinking is just some comedian’s way to laugh-off the seriousness of so many people contracting this fatal disease. But, it’s real. Radon is a proven carcinogen, and experts know more about radon than other carcinogens. So, if you were told to avoid a proven carcinogen, you know that you would. Please, this is important. Radon doesn’t smell, it doesn’t have a taste, and you can’t see it; there aren’t even any immediate symptoms. Radon has the ability to kill you without even giving you a chance to defend yourself, without even knowing, not even a rash! Radon is not only found in the air, but also in water, so be sure to have your well water tested for radon. Although radon does not give you much of a chance to defend yourself or trace whether you have been exposed, radon testing and mitigation systems have been developed in order to measure the radon count in your home, school, or workplace. There are even ways to make these places almost 100 percent radon-free. Not only do you want the places where you spend the most time to have a low radon count, but you want it gone. Did you know that most people, who have cancer from radon exposure, did not get it because they were saturated in it; but because of a low radon concentration? Don’t let radon fool you into thinking you won’t get sick, or that you and your loved ones have no way to protect yourselves. There are experts who know how to regulate radon levels, and provide you with the protection that you need. You can also visit https://www.ph-el.dk/radonsikring for more information.

5. Inspect exposed ducts. Look for obvious holes and whether joints are sealed. Heating, ventilation, and cooling (HVAC) ducts are made of thin metal and easily conduct heat. Consider insulating them. Uninsulated or poorly insulated ducts in unconditioned spaces can lose 10% to 30% of the energy used to heat and cool your home.

6. Check anything that goes through an exterior wall. Examine dryer ducts, plumbing lines under sinks and vanities, anything that pierces a wall. Any gaps around it should be sealed with spray foam insulation or caulk.

Read more: http://www.houselogic.com/articles/diy-home-energy-audit-6-easy-steps/#ixzz17NxAangl